Long-bench belt assembly production line

Relevant requirements of long-bench belt production line 300mm×18m of model ABL-30LT. 1 Total length of the line is 17.75M and effective length is 17.55M. Length of each working position is 0.975M, 18 working positions at single side and 36 working positions in totaled at both sides. 2 Belt of the production line employs imported PVC green static-resistance rubber tape of δ=2mm from Holland, 300mm wide. 3 Width of the bench working table at both sides: 350mm, and total width of the line 1065mm. 4 Height of the working bench 750±20 mm, and total height of the production line is 1900 mm; 5 Instrument shelf is set 400mm above belt of the production line, 425mm wide. 6 Supporting media of the adhesive tape is special belt aluminum section material of HB151 of Huabang as cross beam of the frame, supporting board of the belt and driven roller supporting. 7 The conveyance power employs frequency converter as stepless motor and gear reduction for rate adjustment (0.5-3.0M/mi
Long-bench belt assembly production line